Tuesday, March 2, 2010
A djembe (pronounced /ˈdʒɛmbeɪ/ JEM-bay) also known as djimbe, jenbe, jymbe, jembe, yembe, or jimbay, or sanbanyi in Susu; is a skin-covered hand drum shaped like a large goblet and meant to be played with bare hands.According to the Bamana people in Mali, the name of the djembe comes directly from the saying "Anke dje, anke be" which literally translates to "everyone gather together" and defines the drum's purpose. In the Bamanakan language, "Dje" is the verb for "gather" and "be" translates as "everyone".
Another suggestion for the origin of the name is that 'Djem' refers to the tree used to make the body of the instrument.
It is a member of the membranophone family of musical instruments: a frame or shell (in the djembe's case it is a wood shell) covered by a membrane or drumhead made of rawhide or some other material. Djembes are commonly about 12" (30 cm) in diameter and 24" (60 cm) in height, varying a few inches. They can also be found in many smaller sizes, from 5" (13 cm) to 18" (46 cm) in diameter. As a result of the goblet shape, the density of the wood, the internal carvings, and the skin, there is a wide range of tones that can be produced by the djembe. The rounded shape with the extended tube of the djembe body forms a device known in physics as a Helmholtz resonator, giving it its deep bass note. The primary notes are generally referred to as "bass", "tone", and "slap", though a variety of other tones can also be produced by advanced players. The slap has a high and sharp sound, the tone is more round and full, and the bass is low and deep.
Technique
The proper sound is achieved with minimum effort for maximum effect. The key is to either focus or disperse the hand's energy and to position the hand in the correct place. The bass and tone notes require focused energy (a beginner will have the most success by holding their fingers firmly together), while the slap requires dispersed energy (fingers are relaxed).Striking the skin with the palm and fingers toward the drum's centre produces a bass note; striking the skin near the rim (with the fleshy part of the palm just above the rim) produces the tone and slap. The tone must ring by striking like it's a hot pan. Beginners may think of the tone and slap as fingers "together" and "apart." Advanced players will not take the time to make that obvious physical change but will rather make a less visibly obvious change from "focused" to "dispersed."
Origin
There is general agreement that the origin of the djembe is associated with a class of Mandinka/Susu blacksmiths known as Numu. The wide dispersion of the djembe drums throughout West Africa may be due to Numu migrations dating from the first millennium A.D. Legend has it that the first djembes were made from the skin of the mythical cross between a giraffe and a zebra, the unicorn. Despite the associations of the djembe with the Numu, there do not appear to be hereditary restrictions upon who can play the djembe as occurs with some other African instruments.Spelling "jembe" with the "dj" comes from the fact that French has no hard "j" sound like that found in English. The "dj" is used to indicate the hard "j" pronunciation. The French were instrumental in studying and describing African drumming to the world. However, colonization by the French is a sore spot for many West African people, and spelling jembe with the "d" can be a painful reminder of that. Since independence (1958-1960) African governments have been working toward indigenous ways of spelling their local languages in accordance with international standards of phonetic transcription. (Charry) In the Malinke language, the word is spelled "dyìnbe" because the Malinke orthography does not include the letter "j" (cf. Marianne Friedländer, Lehrbuch des Malinke, Langenscheidt Verlag, 1992, p. 279, 159-160).
Construction
Traditionally crafted djembe drums are carved in one single piece from hollowed out hardwood trees. Specific types of wood depend upon the forests accessible to the drum makers. Some West African hardwoods used for musician-quality instruments (carved in Guinea, Senegal, Mali, and Côte d'Ivoire) include dimba (bush mango), lenge, bois rouge, and acajou.In the mid 1990s furniture makers in Ghana took note of the commercial success being experienced by traditional djembe drum carvers. The craftspeople in Ghana, where the kpanlogo and oblenten drums are the most well known traditional drums, began to carve and sell djembes from Tweneboa, a soft wood. Using soft wood required a much thicker shell that fails to produce the resonant and explosive sound of a hardwood djembe. The commercial savvy of the furniture importers led to a very large number of these soft wood djembes coming into the United States. These "tourist quality" softwood drums appeared in discount department stores like Marshalls and Target, priced at $100 and below. Doing business in the vast U.S. market was also facilitated because the language of business and education in Ghana is English.
Properly made drums are not smooth on the interior but have a spiral channel inside that enhances the tonal qualities. Splinters and rough carving inside are signs of a hastily made drum. The drumheads are typically made from goatskin and more rarely can be antelope, zebra, deer, or calfskin. West African goat skins are known to djembe musicians as having a different sound than goats domesticated in the USA. Goats raised in West Africa experience a rougher existence, different climate, and different diet, which apparently toughen and harden the skins in a way that impacts their sound quality. Goat skins from animals bred and raised in the USA have been known to be softer and tear more easily under the extreme tension required for a playable drum.
Djembe playing by non-African people has a much longer history in Europe than it does in the USA and other parts of the world, as the French-speaking members of Les Ballets Africains first settled in France, Belgium, Germany, and other parts of Europe when they left the touring company to seek personal opportunities. Because of this history, and the education that Europeans received from traditional Manding teachers like Mamady Keita and Famoudou Konate, Europe has mostly avoided the large number of softwood djembes arriving in the American marketplace. While these drums may look nice, their sound leaves much to be desired for serious djembe players.
A first class of djembe of growing popularity in the north because of drum circles and other foot-drum events of a more social nature are the modern synthetic drums. These drums have shells formed of plastic or resin-composite materials, metal mechanical tuning rather than traditional ropes, and often plastic rather than goatskin heads. They are often manufactured and sold by traditional drum equipment companies such as Pearl, Meinl, Toca, and Remo. The Remo drums, for example, have a loud, harsh tone and a nearly indestructible nature which makes them a popular choice for drumming events outdoors such as at the beach. However, the plastic tone and conga-like tuning mechanisms keep them from being considered for serious traditional djembe drumming.
Tuning
Djembe drums are tuned by evenly pulling the vertical ropes very tightly so that a system of metal rings brings the skin down over the drum shell. These verticals are tightened all the way around, perhaps taking multiple passes, and using a lever of some sort. The next step is to use more rope to put in horizontal "twists" of the vertical ropes. It passes under two verticals, back over one, under one (making a Z or S shape), then gets pulled hard and down. Uniform and parallel rows of twists, as low as possible, is the ideal.When a new skin is being put on a drum, this whole pulling process is preceded by soaking a skin in water until it is very pliable. That wet skin is placed on the drum with the ring system while the rope verticals gently pull the rings down a bit. Then it's left to dry completely before the vigorous pulling and twisting described above happens.
African Music
The djembé was adopted into African American and American culture. The bags and the clothing of the man on the right are printed with traditional kente cloth patterns.
Iannis Xenakis composed Okho for three djembes.
Study
Traditionally, as today, in Africa an individual needs to spend many years accompanying his master in ceremonies and other festivities before becoming a real djembefola (djembe player). Today in the communities of the "western civilization" learning to play the djembe generally involves finding a master drummer and having private lessons or lessons for small groups of people. Players generally need to learn the basic sounds and traditional rhythm samples (4/4 and 12/8) to be able to follow classes. Many years of playing and learning are needed to be able to produce a sound that is comparable in its quality to that of a master drummer.Written transcriptions of rhythms tend to be imprecise. Usually only the basic idea of the rhythm is transcribed but the real feeling that it carries can't be easily put down on paper. This is due to the nature of the West African music - the different types of swing (at least four of them) that are not expressible with western notation. For this reason the written material for advanced players is still scarce if not unavailable, while the general and informational literature are readily obtained.
Leave your response